The Initial Setup menu
18
146
En
HDMI Output
(only available when an HDMI device is connected)
Screen
Resolution
1920 x 1080p
Constant 1920 x 1080p output.
1920 x 1080i
Constant 1920 x 1080i output.
1280 x 720p
Constant 1280 x 720p output.
720 x 576p
(720 x 480p)
Constant 720 x 576p output (when setting the
Input Line
System
to
525 System
, video is output in 720 x 480p).
720 x 576i
(720 x 480i)
Constant 720 x 576i output (when setting the
Input Line
System
to
525 System
, video is output in 720 x 480i).
• Depending on the connected device some settings may not be available.
• If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case,
press
OPEN/CLOSE
while holding down the
(Stop) button on the front panel to switch the setting (this also
switches Component Video Out on page 139 to the default setting).
• If you have the
Colour
set to
YCbCr 4:2:2
, you cannot select
720 x 576i
(720 x 480i)
.
4:3 Video Output Full
Select if your HDMI TV allows you to change the aspect ratio.
Normal
Select if your HDMI TV does not allow you to change the
aspect ratio. 4:3 video will be shown with bars on each side.
Colour
RGB (0–255)
Use if colours are weak and black appears to ‘float’ on the
RGB (16–235)
setting.
RGB (16–235)
Use this setting if colours appear overly rich and the black
too deep on the
RGB (0–255)
setting.
YCbCr 4:2:2
The video signal is output as a YCbCr 4:2:2 component
signal. This is the standard setting for HDMI-compatible
devices.
YCbCr 4:4:4
The video signal is output as a YCbCr 4:4:4 component
signal.
• Depending on the connected device some settings may not be available.
• When a DVI device is connected, the
YCbCr 4:2:2
and
YCbCr 4:4:4
options are not available.
• You cannot choose
YCbCr 4:2:2
when the
Screen Resolution
is set to
720 x 576i (720 x 480i)
.
Audio Output
Auto •
Dolby Digital, MPEG and DTS sources are output as a
bitstream signal. However, depending on the
Audio Out
setting, number of audio channels, and the HDMI-connected
device, Linear PCM audio may be output.
PCM
All audio signals are converted to Linear PCM (except DTS).
Bitstream
Priority
Select if the connected device is compatible with bitstream
audio.
This setting is not available when a DVI device is connected.
Setting
Options
Explanation
18 Initial_Settings.fm 146 ページ ２００８年２月１８日 月曜日 午後６時４４分
Содержание DVR-LX61D
Страница 1: ...HDD DVD Recorder Operating Instructions ...
Страница 173: ...Additional information 173 En 19 ...
Страница 174: ...Additional information 19 174 En ...
Страница 175: ...Additional information 175 En 19 Follow the instructions for Replace Channels page 137 ...
