Pioneer DVR-545H, Руководство по эксплуатации

Страница: 151 / 163

Additional information
17
151
En
Timer program doesn’t
record successfully • When setting the recording channel, make sure you set the
recorder’s built-in TV tuner, not the TV’s built-in tuner.
• When recording to a Video mode disc, programs that are copy-once
protected cannot be recorded. Use a VR mode formatted disc for copy-
once material (page 57).
• Two timer programs may have overlapped, in which case only the
earlier one will record completely.
• The power may have failed during recording.
After briefly unplug-
ging or after a power
failure the front panel
display shows ‘--:--’ • A backup battery inside the recorder keeps the clock and other
settings from being reset when there is no power to the recorder. After
unplugging or a power failure, the battery keeps all settings for a
period of several minutes. Reset the clock and other recorder settings
to use the recorder again.
Front panel display
shows ‘LOCK’ when a
button is pressed • The Child Lock is on; turn off in order to use the recorder (page 65).
Can’t use One Touch
Copy (HDD to DVD) • Make sure that there is a recordable DVD-R/-RW loaded with some
free space for recording and fewer than 99 titles already on the disc.
Also make sure that for a Video mode disc or a DVD+R, the disc isn’t
finalized.
• Make sure there is a recordable DVD+R/+RW loaded with some
free space for recording and fewer than 49 titles already on the disc.
• If you delete a title from a DVD+R/+RW disc, the number of
remaining recordable titles may not decrease.
• Further recording is not possible on a finalized DVD+R. Check that
there isn’t a disc menu on the disc you’re trying to use.
• If the title currently playing contains material that is copy-once
protected, One Touch Copy will not work.
• One Touch Copy can’t be used for titles over 8 hours long when
copying to DVD+R/+RW (though you can use a DVD+R DL).
• One Touch Copy can’t be used for
MN1 to MN6 , SEP , SLP or EP titles
when copying to DVD+R/+RW.
• One Touch Copy doesn’t work if the recorder is already recording to
DVD.
Can’t use One Touch
Copy (DVD to HDD) • Make sure that there is space available on the HDD and that there
are fewer than 999 titles on the HDD.
• One Touch Copy doesn’t work if the recorder is already recording to
the HDD.
Problem Remedy
DVR645H_WY_EN.book 151 ページ ２００６年７月５日 水曜日 午前１０時２５分