Tuner
En
21
Listening to the radio
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 22.
1
STEREO
(
ST
) indicator
Shows that the frequency selected is being
broadcast in stereo.
2
BAND
indicator
Shows which band the radio is tuned to, AM
or FM.
3
PRESET NUMBER
indicator
Shows what preset has been selected.
4
FREQUENCY
indicator
Shows to which frequency the tuner is
tuned.
1 Press
SOURCE
to select the tuner
.
Press
SOURCE
until you see
Tuner
displayed.
• Pressing
SOURCE
on the head unit also per-
forms the same operation.
2 Use
VOLUME
to adjust the sound level.
Press
VOLUME
to increase or decrease the vol-
ume.
• Rotating
VOLUME
on the head unit also
increases or decreases the volume.
3 Press
BAND/ESC
to select a band
.
Press
BAND/ESC
until the desired band is dis-
played,
FM1
,
FM2
,
FM3
for FM or
AM
.
• Pressing
BAND/ESC
on the head unit also
performs the same operation.
4 To perform manual tuning, press
1
or
¡
with quick presses.
The frequencies move up or down step by step.
• Pressing
2
or
3
on the head unit also per-
forms the same operation.
5 To perform seek tuning, press and hold
1
or
¡
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
1
or
¡
with a quick press.
• If you press and hold
1
or
¡
you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
• Pressing
2
or
3
on the head unit also per-
forms the same operation.
Note
• When the frequency selected is being broad-
cast in stereo the
STEREO
(ST) indicator will
light.
1
2 3
4
English
Español
Deutsch
F
rançais
Italiano
Nederlands
03
Section
