Pioneer DVH-P5650MP Скачать руководство пользователя страница 92

Страница: 92 / 102

Message

Cause

Action

ERR FSP

ERR FLSP

ERR FRSP

ERR CSP

ERR RLSP

ERR RRSP

ERR SW

The microphone cannot pick up the

measuring tone of a speaker.

Confirm that the speakers are connected

correctly.

Correct the input level setting of the power

amp connected to the speakers.

Set the microphone correctly.

ERR NOIS

The surrounding noise level is too

high.

Stop your car in a place that is as quiet as

possible, and switch off the engine, air condi-

tioner or heater.

Set the microphone correctly.

DVD player and care

Use only normal, round discs. If you insert

irregular, non-round, shaped discs they

may jam in the DVD player or not play prop-

erly.

Check all discs for cracks, scratches or

warping before playing. Discs that have

cracks, scratches or are warped may not

play properly. Do not use such discs.

Avoid touching the recorded (non-printed)

surface when handling the disc.

Store discs in their cases when not in use.

Keep discs out of direct sunlight and do

not expose the discs to high temperatures.

Do not attach labels, write on or apply che-

micals to the surface of the discs.

To clean a disc, wipe the disc with a soft

cloth outward from the center.

If the heater is used in cold weather, con-

densation may form on components inside

the DVD player. Condensation may cause

the DVD player to not operate properly. If

you think that condensation is a problem

turn off the DVD player for an hour or so to

allow it to dry out and wipe any damp discs

with a soft cloth to remove the moisture.

Road shocks may interrupt disc

playback.

DVD discs

With some DVD video discs, it may not be

possible to use certain functions.

It may not be possible to play back some

DVD video discs.

When DVD-R/DVD-RW discs are used,

playback is possible only for discs which

have been finalized.

When DVD-R/DVD-RW discs are used,

playback is possible only for discs which

have been recorded with the Video format

(video mode). It is not possible to play back

DVD-RW discs which have been recorded

with the Video Recording format (VR

mode).

It may not be possible to play back DVD-R/

DVD-RW discs which have been recorded

Additional Information

Appendix

Содержание DVH-P5650MP







































































































Результаты поиска

Содержание DVH-P5650MP

Отзывы:

Похожие инструкции для DVH-P5650MP

Бренды по названию

Популярные бренды

Pioneer DVH-P5650MP, Руководство по эксплуатации

Результаты поиска

Содержание DVH-P5650MP

Отзывы:

Похожие инструкции для DVH-P5650MP

Бренды по названию

Популярные бренды