Additional information
10
84
En
• Static electricity or other external influences may cause malfunctioning of this unit. In this
case, unplug the power cord and then plug back in. This will usually reset the unit for proper
operation. If this does not correct the problem, please consult your nearest Pioneer service
center.
The audio recorded on a
Super VCD disc is not
output properly.
•If the audio is switched to
[2]
when playing a Super VCD that
contains only one stereo soundtrack, there may be no sound at all.
Press
AUDIO
to change the soundtrack.
Can’t hear effect of
TruSurround
• TruSurround does not work with DTS, DVD-Audio, SACD or 96kHz
linear PCM DVD.
• The TruSurround effect is only output through the
AUDIO OUT
(2ch)
analog audio outputs.
• Make sure that
Audio Output Mode
is set to
2 Channel
(page 66).
• The effectiveness of TruSurround varies with the disc.
Problem
Remedy
DV565.book Page 84 Friday, April 25, 2003 1:42 PM