DRM-ULV16
5
5
6
7
8
5
6
7
8
C
D
F
A
B
E
1. SPECIFICATIONS
SCSI Terminator (LVD) x 1
(DKN1368)
SCSI Cable (LVD) : 0.55 m x 1
(DDC1015)
Accessories
[Interface]
SE side
: SCSI-2 *1 (Amphenol 50-pin) ............................. x 1
LVD side : Ultra 160 SCSI *1 (Half-pitch 68-pin) ................. x 2
∗
1: Transfer speed may differ depending on the devices connected.
[Maximum cable connection length (including internal connection cables)]
SE side
............................................................................... 3 m *2
LVD side ............................................................................... 12 m *2
[Maximum units connectable]
Total LVD and SE devices ..................................................... 15 *2
(including changers, but not including host bus adapters)
∗
2: For SCSI cable and SCSI Terminator (LVD) use provided accessory or Pioneer-recommended product.
[Other specifications]
Power ..................................................................................... DC +5 V, 0.7 A
Dimensions
CONV Unit Block(internal changer dimension) .................... 140.1 (W) x 117.2 (D) x 70.1 (H) mm
Rear Terminal Block (not including cables).......................... 100.0 (W) x 40.2 (D) x 82.0 (H) mm
Weight .................................................................................... 0.68 kg
Temperature during use (ambient changer temperature) ...... +5
°
C – +35
°
C
Humidity during use (ambient changer humidity) ................... 5% – 85% (without condensation)
Temperature during storage ................................................... –40
°
C – +60
°
C
Humidity during storage ......................................................... 5% – 90% (without condensation)
[Accessories]
SCSI Terminator (LVD) .......................................................... x 1
SCSI Cable (LVD) : 0.55 m .................................................... x 1
Parts noted below are used when connecting to changer
Connector Assy ...................................................................... x 2
Screws .................................................................................... x 4
Posts (Card Spacers) ............................................................. x 2
Cushion .................................................................................. x 1
Edge guard ............................................................................. x 1
Cable binders ......................................................................... x 3
The specifications and design of this product are subject to change
without notice, due to improvement
.