DRM-ULV16
22
1
2
3
4
1
2
3
4
C
D
F
A
B
E
7.2 OPERATION CHECKS
Top view
ON OFF
Function switches
Note:
Be sure to perform the following operation checks after installation or repair.
7
Things required for operation checks
•
GGS1030: DiagnoseV (use the version 2.900 or later)
•
GGV1035: DVD-ROM (Single/DVDT-001)
•
DVD-D7362/DVD-D7563
•
Personal computer
∗
: SCSI data must be checked via the DRM-ULV16, as shown in Fig.1 "Connection example" below.
∗
: On the DVD-D7563 or DVD-D7362, the SCSI mode must be set to SCSI-3, as shown in Fig.2.
When the SCSI mode setting was changed, return the switch setting to the original after checking.
Fig.1: Connection example
Fig.2: Function switches
These switches are used for inspection before shipment. Do NOT change the settings.
SCSI mode select switch
OFF (SCSI-2 mode): Burst transfer rate 10 MByte/sec
ON (SCSI-3 mode): Burst transfer rate 20 MByte/sec
∗
: Upon shipment, the switch is set to OFF (SCSI-2 mode).
