manualshive.com logo in svg
background image

 

ORDER NO.

PIONEER CORPORATION

   

4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC.

  P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.

PIONEER EUROPE NV

  Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

  253 Alexandra Road, #04-01, Singapore 159936

   PIONEER CORPORATION 2004

 

DRM-ULV16

 

RRV3060

 

LVD SCSI INTERFACE UNIT

 

DRM-ULV16

 

ZUCYV/WL

 

THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).

This service manual should be used together with the following manual(s).

 

  IMPORTANT:

 

Before performing maintenance work or optional installation, be sure to set the power 
switches of the main unit and its peripheral equipment to their OFF positions, then dis-
connect their power cords, in order to avoid failure of the equipment and electric shock..

 

Note: 

 

• If this unit is used with the DVD-R7783, the firmware version of the changer must be 

Ver. 1.25 or later

 

Model

Type

Power Requirement

Remarks

 

DRM-ULV16

ZUCYV/WL

DC Power supply from other system

 

Model No.

Order No.

Remarks

 

DRM-7000

RRV2173

700 DISC CHANGER

DRM-3000

RRV2734

300 DISC CHANGER

For details, refer to "Important Check Points for Good Servicing". 

 

T-ZZY DEC.  2004 printed in Japan

Содержание DRM-ULV16





























Отзывы: