Pioneer DRM-5004X, Руководство пользователя

Страница: 138 / 208

5
Pioneer DRM-5004X CD-ROM Jukebox User’s Guide TP #120 v .1.0 2/95 5 - 11
5.4 MODE 3 - Manual Operation
(Press MD+ for Mode 3.)
In this mode, the user can move the mechanical elements of the unit.
The element moves only as long as the button is pressed. For
Example see
Figure 5-10 , In Mode 3, Move the Disc Transporter to
Disc Location 401. Select Mode 3, Submode 0 and press S1 until the
display indicates disc address 401.
The submode number indicates one of the mechanical elements with-
in the unit. Push SM+ or SM- to select one. When S1, S2, S3 or S4
button is pressed, the mechanical element is moved as indicated in
the chart below.
See Figure 5-11 , Mode 3, Manual Operation Mode.
Example: The Mode 4 example on the next page can be executed
within Mode 3, but in Mode 3 the S1-S4 buttons must be held down
until a motion is completed. See Mode 4 example on next page. The
Test Mode Buttons, SM+, SM-, and S1 to S4, are pressed to execute
the example, as indicated.
Test Mode
Figure 5-11 Mode 3, Manual Operation Mode Submode Descriptions. Access Using S1-S4.
Sub mode Mechanism S1 S2 S3 S4
0 Disc Transport Up Down* Indicates
L or R address
1 Swing Arm Left Center Right
2 Slide Extend Retract** Front
3 Chuck Close Open
4 Upper Clamper CCW CW
5 Lower Clamper CCW CW
Clamper movement is shown as rotation direction of cam from top.
CCW= Counter Clockwise; CW = Clockwise.
*As S1 and S2 change, the address changes. To find exact address of left side press S4, press S4 again,
to see address of right side.
**The slide arm can only be extended or retracted when the swing arm is in a left or right position.
NOTE: There are four states for the both the upper and lower clampers:
Both UP, Right Up-Left Down, Left Up-Right Down, Both down.
Mode 3 Ñ Manual Operation