Connecting the Units
<ENGLISH>
Low range output
(LOW/SUBWOOFER
OUTPUT)
+
≠
+
≠
Low range speaker
System remote control
Connecting cords with RCA pin
plugs (sold separately)
Power amp
(sold separately)
Perform this connection when using the optional amplifier.
Antenna jack
This product
+
≠
+
≠
+
≠
+
≠
Left
Right
Gray
Gray/black
Violet
Violet/black
White
White/black
Green
Green/black
Blue/white
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300
mA 12 V DC).
Middle range speaker
Middle range speaker
High range speaker
High range speaker
Low range speaker
Left
Right
23 cm (9 in.)
DSP switch
Switch the DSP switch as
illustration below.
Power cable
(For details, refer to Fig. 2.)
Connection diagram for 3-way network mode with internal amp
Fig. 5
Left
Right
Middle range output
(MID/FRONT OUTPUT)
High range output
(HIGH/REAR OUTPUT)
Low range output
(LOW/SUBWOOFER
OUTPUT)
+
≠
+
≠
+
≠
+
≠
+
≠
+
≠
Low range speaker
Low range speaker
Middle range speaker
High range speaker
System remote control
Power amp
(sold separately)
Connecting cords with RCA pin
plugs (sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Blue/white
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300
mA 12 V DC).
Speaker leads
Not used.
Antenna jack
This product
Gray
Gray/black
Violet
Violet/black
White
White/black
Green
Green/black
Middle range speaker
High range speaker
23 cm (9 in.)
15 cm (5-7/8 in.)
15 cm (5-7/8 in.)
DSP switch
Switch the DSP switch as
illustration below.
Power cable
(For details, refer to Fig. 2.)
Connection diagram for 3-way network mode without internal amp
Note:
•
If using this system, we recommend that this unit’s internal amp is turned off.
For more details, refer to operation manual.
Fig. 6
