Playing a CD
1
2
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1
Track number indicator
Shows the track currently playing.
2
Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press SOURCE to select the built-in CD
player.
Press
SOURCE
until you see
Compact Disc
displayed.
#
If no disc is loaded in the unit, you cannot se-
lect
Compact Disc
(built-in CD player). Insert a
disc in the unit. (Refer to page 14.)
2 To performfast forward or reverse,
push and hold Multi-Control left or right.
#
If you select
Rough search
, pushing and hold-
ing
Multi-Control
left or right enables you to
search every 10 tracks in the current disc. (Refer
to
Selecting the search method
on page 21.)
3 To skip back or forward to another
track, push Multi-Control left or right.
Pushing
Multi-Control
right skips to the start
of the next track. Pushing
Multi-Control
left
once skips to the start of the current track.
Pushing again will skip to the previous track.
Note
When a CD TEXT disc is inserted, the disc title
automatically begin to scroll in the display.
When Ever Scroll is set to ON at the initial setting,
the disc title scroll continuously. About Ever
Scroll, refer to
Switching the Ever Scroll
on page
57.
Selecting a trackdirectly
When using the remote control, you can select
a track directly by entering the desired track
number.
!
You cannot operate this mode from func-
tion display.
1 Press DIRECT.
Track number input display appears.
2 Press NUMBER buttons to enter the de-
sired track number.
#
You can cancel the input number by pressing
CLEAR
.
3 Press DIRECT.
The track of entered number will play.
Note
After entering the number input mode, if you do
not perform an operation within about 30 sec-
onds, the mode is automatically canceled.
Built-in CD Player
En
19
English
Section
05
