Listening to the radio
1
2 3
4
6
5
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1
Band indicator
Shows which band the radio is tuned to, AM
or FM.
2
LOC indicator
Shows when local seek tuning is on.
3
Stereo (
5
) indicator
Shows that the frequency selected is being
broadcast in stereo.
4
Preset number indicator
Shows which preset has been selected.
5
Signal level indicator
Shows the radio wave strength.
6
Frequency indicator
Shows to which frequency the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press
SOURCE
until you see
Tuner
displayed.
2 Press BAND to select a band.
Press
BAND
until the desired band is dis-
played,
FM-1
,
FM-2
,
FM-3
for FMor
AM
.
3 To performmanual tuning, push
Multi-Control left or right.
The frequencies move up or down step by
step.
4 To performseek tuning, push and hold
Multi-Control left or right for about one
second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by pushing
Multi-Control
left or right.
#
If you push and hold
Multi-Control
left or
right you can skip stations. Seek tuning starts as
soon as you release
Multi-Control
.
Tuner
En
16
Section
04