Audio Adjustments
En
30
07
Section
• If you switch the
SFEQ
mode, the
H.P.F.
func-
tion is automatically switched off. By switch-
ing the
H.P.F.
function on after selecting the
SFEQ
mode, you can combine
H.P.F.
function
with
SFEQ
function.
Using balance adjustment
You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press
AUDIO
to select
Fad
.
Press
AUDIO
until
Fad
appears in the display.
• If the balance setting has been previously
adjusted,
Bal
will be displayed.
2 Press
5
or
∞
to adjust front/rear speaker
balance.
Each press of
5
or
∞
moves the front/rear
speaker balance towards the front or the rear.
•
Fad F15
–
Fad R15
is displayed as the front/rear
speaker balance moves from front to rear.
•
Fad 0
is the proper setting when only two
speakers are used.
• When the rear output setting is
Rear SP:S.W
,
you cannot adjust front/rear speaker balance.
Refer to
Setting the rear output and subwoofer
controller
on page 37.
3 Press
2
or
3
to adjust left/right speaker
balance.
When you press
2
or
3
,
Bal 0
is displayed. Each
press of
2
or
3
moves the left/right speaker
balance towards the left or the right.
•
Bal L9
–
Bal R9
is displayed as the left/right
speaker balance moves from left to right.
Using the equalizer
The graphic equalizer lets you adjust the equal-
ization to match car interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list of
the equalizer curves:
Display
Equalizer curve
SUPER BASS
Super bass
POWERFUL
Powerful
NATURAL
Natural
VOCAL
Vocal
CUSTOM1,2
Custom1,2
FLAT
Flat
•
CUSTOM1
and
CUSTOM2
are adjusted equal-
izer curve.
• A separate
CUSTOM1
curve can be created
for each source. (The Built-in CD player and
Multi-CD player are set to the same Equalizer
Curve Adjustment setting automatically.)
• If you make adjustments when a curve other
than
CUSTOM2
is selected, the equalizer curve
settings are memorized in
CUSTOM1
.
• A
CUSTOM2
curve can be created common to
all sources.
• If you make adjustments when the
CUSTOM2
curve is selected, the
CUSTOM2
curve is
updated.
• When
FLAT
is selected no supplement or
correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between
FLAT
and a set
equalizer curve.