En
29
English
Español
Deutsch
F
rançais
Italiano
Nederlands
07
Section
Audio Adjustments
Introduction of audio
adjustments
1
AUDIO
display
Shows the audio adjustments status.
Press
AUDIO
to display the audio function
names.
Press
AUDIO
repeatedly to switch between the
following audio functions:
Fad
(balance adjustment)—
EQ
(equalizer curve
adjustment)—
Bass
(bass)—
Treble
(treble)—
Loud
(loudness)—
Sub-W1
(subwoofer1)/
Non Fad
(non fading output on/off)—
Sub-W2
(subwoofer2)/
Non Fad
(non fading output set-
ting)—
HPF
(high pass filter)—
SLA
(source level
adjustment)
• When the subwoofer controller setting is only
S.W Control:EXT
, you cannot switch the
Sub-W1
.
(Refer to page 37.)
• You can select the
Sub-W2
only when
Subwoofer output is switched on in the
Sub-W1
.
• When the subwoofer controller setting is only
S.W Control:EXT
, you can switch the non fading
output on/off mode. (Refer to page 37.)
• You can select the non fading output setting
mode only when non fading output is switched
on in the non fading output on/off mode.
• When selecting the FM tuner as the source,
you cannot switch to
SLA
.
• To return to the playback display, press
BAND/ESC
.
Note
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
Setting the sound focus equal-
izer
Clarifying the sound image of vocals and instru-
ments allows the simple staging of a natural,
pleasant sound environment.
Even greater listening enjoyment will be
obtained if seating positions are chosen care-
fully.
•
FRT1
boosts the treble on the front output and
the bass on the rear output.
FRT2
boosts the treble and the bass on the front
output and the bass on the rear output. (The
bass boost is the same for both front and rear.)
For both
FRT1
and
FRT2
the
H
setting provides a
more pronounced effect than the
L
setting.
1 Press
SFEQ
to select the desired
SFEQ
mode.
FRT1-H
(front1-high) —
FRT1-L
(front1-low) —
FRT2-H
(front2-high) —
FRT2-L
(front2-low) —
CUSTOM
(custom) —
SFEQ OFF
(off)
2 Press
2
or
3
to select the desired posi-
tion.
Press
2
or
3
until the desired position appears
in the display.
LEFT
(left) —
CENTER
(center) —
RIGHT
(right)
Notes
• If you adjust the bass or treble,
CUSTOM
memorizes an
SFEQ
mode in which the bass
and treble are adjusted for personal prefer-
ence.
1