1
Select a desired phone number from
the phone book or the call history. Or di-
rectly enter a desired phone number.
To select a desired phone number from the
Phone Book or the Call History, see the in-
structions explained in previous pages. To di-
rectly enter a desired phone number, see
Making a call by entering phone number
on
this page.
2
Press and hold one of 1 to 6 on the re-
mote control to store the phone number.
The selected phone number has been stored
in memory. The next time you press the same
preset button, the phone number is recalled
from memory.
Making a call by entering
phone number
Important
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
1
Display the function menu.
Refer to
Function and operation
on page 48.
2
Use MULTI-CONTROL to select
Number dial in the function menu.
#
You can also enter in this menu from the
standby display by pressing
DIRECT
on the re-
mote control.
3
Push MULTI-CONTROL up or down to
select a number.
#
You can also input numbers by pressing
0
to
9
on the remote control.
4
Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
#
Up to 24 digits can be entered.
5
When you completed entering the
number, press MULTI-CONTROL.
Call confirmation appears.
6
Press MULTI-CONTROL again to make a
call.
7
To end the call, push MULTI-CONTROL
down.
Clearing memory
1
Display the function menu.
Refer to
Function and operation
on page 48.
2
Use MULTI-CONTROL to select
Clear memory in the function menu.
3
Push MULTI-CONTROL up or down to
select an item.
Each time
MULTI-CONTROL
is pushed up or
down, the items are switched in the following
order:
Phone book
(phone book)
—
Missed calls
(missed call history)
—
Dialed calls
(dialled
call history)
—
Received calls
(received call his-
tory)
—
Dial preset
(preset phone numbers)
—
All clear
(delete all memory)
#
If you want to clear all the Phone Book,
dialled/received/missed call history list and pre-
set phone number, select
All clear
.
#
If guest phone is connected to this unit via
Bluetooth wireless technology,
Phone book
can-
not be selected.
4
Push MULTI-CONTROL right to deter-
mine the item that you want to delete
from this unit.
Clear memory YES
is displayed. Clearing
memory is now on standby.
#
If you do not want to clear memory that you
have selected, push
MULTI-CONTROL
left. The
display reverts.
5
Press MULTI-CONTROL to clear the
memory.
Cleared
is displayed and data on the selected
item is cleared from this unit
’
s memory.
Setting automatic rejecting
1
Display the function menu.
Refer to
Function and operation
on page 48.
2
Use MULTI-CONTROL to select
Refuse calls in the function menu.
3
Press MULTI-CONTROL to turn auto-
matic call rejection on.
#
To turn automatic call rejection off, press
MULTI-CONTROL
again.
Available accessories
En
54
Section
06
