3
Press MULTI-CONTROL to switch the tel-
ephone muting/attenuation.
Pressing
MULTI-CONTROL
will switch be-
tween
TEL ATT
(attenuation) and
TEL mute
(muting) and that status will be displayed.
Switching the feature demo
The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON.
!
For this function, verify the topic
Adjusting
initial settings
before initiating the opera-
tion.
1
Display the intial setting menu.
2
Use MULTI-CONTROL to select
Demonstration.
3
Press MULTI-CONTROL to turn the fea-
ture demo on.
#
To turn the feature demo off, press
MULTI-CONTROL
again.
Notes
!
Remember that if the feature demo continues
operating when the car engine is turned off, it
may drain battery power.
!
You can also turn on or off feature demo by
pressing
DISP
while this unit is turned off. For
more details, see
About the demo mode
on
page 7.
Switching the reverse mode
If you do not perform an operation for about
30 seconds, screen indications start to reverse,
and continue reversing every 10 seconds.
!
For this function, verify the topic
Adjusting
initial settings
before initiating the opera-
tion.
1
Display the intial setting menu.
2
Use MULTI-CONTROL to select
Reverse mode.
3
Press MULTI-CONTROL to turn the re-
verse mode on.
#
To turn the reverse mode off, press
MULTI-CONTROL
again.
Note
You can also turn on or off reverse mode by press-
ing
BAND
while this unit is turned off. For more
details, see
Reverse mode
on page 8.
Switching the ever scroll
When ever scroll is set to on, CD text informa-
tion scrolls continuously in the display. Set to
off if you prefer the information to scroll just
once.
!
For this function, verify the topic
Adjusting
initial settings
before initiating the opera-
tion.
1
Display the intial setting menu.
2
Use MULTI-CONTROL to select
Ever-scroll.
3
Press MULTI-CONTROL to turn the ever
scroll on.
#
To turn the Ever Scroll off, press
MULTI-CONTROL
again.
Activating the
BT Audio
source
You need to activate the
BT Audio
source in
order to use a Bluetooth audio player.
!
You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
!
For this function, verify the topic
Adjusting
initial settings
before initiating the opera-
tion.
1
Display the intial setting menu.
Initial Settings
En
38
Section
04