Playing songs on iPod
For details about the supported iPod, refer to
iPod
®
compatibility on page 6.
Basic Operations
1
Song number indicator
2
Play time indicator
3
Song time (progress bar)
%
Fast forward or reverse
Push and hold
MULTI-CONTROL
left or right.
%
Select a track (chapter)
Push
MULTI-CONTROL
left or right.
Notes
!
When using an iPod, iPod Dock Connector to
USB Cable is required.
!
Read the precautions for iPod on page 67.
!
While iPod is connected to this unit,
PIONEER
(or
(check mark)) is displayed on the iPod.
!
If an error message is displayed, refer to
Error
messages
on page 63.
!
When the ignition switch is set to ACC or ON,
the iPod
’
s battery is charged while the iPod is
connected to this unit.
!
While the iPod is connected to this unit, the
iPod cannot be turned on or off.
!
Before connecting the dock connector of this
unit to the iPod, disconnect the headphones
from the iPod.
!
The iPod is turned off about two minutes after
the ignition switch is set to OFF.
Browsing for a song
Searching songs by category
Operations to control an iPod with this unit is
designed to be as close to the iPod as possible
to make operation and song search easy.
!
Depending on the number of files in the
iPod, there may be delay when displaying a
list.
!
If the characters recorded on the iPod are
not compatible with this unit, those charac-
ters are not displayed.
1
Press LIST.
2
Use MULTI-CONTROL to select a cate-
gory.
Turn to change the category; press to select.
Playlists
(playlists)
—
Artists
(artists)
—
Albums
(albums)
—
Songs
(songs)
—
Podcasts
(podcasts)
—
Genres
(genres)
—
Composers
(composers)
—
Audiobooks
(audiobooks)
List for the selected category is displayed.
#
You can start playback throughout the se-
lected category by pressing and holding
MULTI-CONTROL
. You can also perform this op-
eration by pushing and holding
MULTI-CONTROL
right.
#
You can also change the category by pushing
MULTI-CONTROL
up or down.
#
You can also select the category by pushing
MULTI-CONTROL
right.
#
To return to the previous category, push
MULTI-CONTROL
left.
#
To return to the top tier of categories, push
and hold
MULTI-CONTROL
left.
#
To return to the ordinary display, press
BAND
.
#
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
3
Repeat step 2 to find a song you want
to listen to.
Searching songs by alphabet
1
Press LIST.
Operating this unit
En
25
Section
02
Operating
this
unit