Black plate (34,1)
Using the AUX source
This unit can control up to two auxiliary equip-
ments such as VCR or portable devices (sold
separately). When connected, auxiliary equip-
ments are automatically read in as AUX
sources and assigned to
AUX1
or
AUX2
. The
relationship between
AUX1
and
AUX2
sources is explained below.
About AUX connection method
You have two methods to connect auxiliary
equipments to this unit.
Stereo mini pin plug cable (
AUX1
)
When connecting auxiliary equipment using a
stereo mini plug cable
%
Insert the stereo mini plug into the
AUX input jack on this unit.
For more details, refer to the installation man-
ual.
The allocation of this auxiliary equipment is
automatically set to
AUX1
.
IP-BUS-RCA interconnector (
AUX2
)
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
%
Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner
’
s manual.
#
You can only make this type of connection if
the auxiliary equipment has RCA outputs.
Selecting AUX as the source
%
Press SOURCE to select AUX (AUX1 or
AUX2) as the source.
Press
SOURCE
until
AUX
appears in the dis-
play.
#
If the auxiliary setting is not turned on,
AUX
cannot be selected. For more details, see
Switch-
ing the auxiliary setting
on the previous page.
Setting the AUX title
The title displayed for each
AUX1
or
AUX2
source can be changed.
1
After you have selected AUX as the
source, press FUNCTION and hold until
TITLE IN appears in the display.
2
Press
a
or
b
to select a letter of the al-
phabet.
Each press of
a
will display alphabet, num-
bers or symbols in ascending order (
A B C ...
).
Each press of
b
will display a letter in des-
cending order.
3
Press
d
to move the cursor to the next
character position.
When the letter you want is displayed, press
d
to move the cursor to the next position and
then select the next letter. Press
c
to move
backwards in the display.
4
Move the cursor to the last position by
pressing
d
after entering the title.
When you press
d
one more time, the entered
title is stored in memory.
5
Press BAND to return to the playback
display.
<YRD5114-A/U>34
Other Functions
En
34
Section
09