Black plate (8,1)
Remote control
Operation is the same as when using the but-
tons on the head unit. See the explanation of
the head unit about the operation of each but-
ton with the exception of
PAUSE
, which is ex-
plained below.
e
PAUSE button
Press to turn pause on or off.
f
SOURCE button
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
g
VOLUME button
Press to increase or decrease the volume.
Turning the unit on and
selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 11).
%
Press SOURCE to select a source.
Press
SOURCE
repeatedly to switch between
the following sources:
Tuner
—
Television
—
Built-in CD player
—
Multi-CD player
—
iPod
—
External unit 1
—
External unit 2
—
AUX1
—
AUX2
Notes
!
In the following cases, the sound source will
not change:
—
When there is no unit corresponding to the
selected source connected to this unit.
—
When there is no disc in the unit.
—
When there is no magazine in the multi-
CD player.
—
When the AUX (auxiliary input) is set to off
(refer to page 33).
!
AUX1 is set to on by default. Turn off the AUX1
when not in use (refer to
Switching the auxili-
ary setting
on page 33).
!
External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
!
When this unit
’
s blue/white lead is connected
to the vehicle
’
s auto-antenna relay control
terminal, the vehicle
’
s antenna extends when
this unit
’
s source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
%
Use VOLUME to adjust the sound
level.
Turning the unit off
%
Press SOURCE and hold until the unit
turns off.
<YRD5114-A/U>8
Basic Operations
En
8
Section
02