Using the AUX source
Up to two auxiliary devices such as VCR or
portable devices (sold separately) can be con-
nected to this unit. When connected, auxiliary
devices are automatically read as AUX sources
and assigned to
AUX1
or
AUX2
. The relation-
ship between
AUX1
and
AUX2
sources is ex-
plained below.
About
AUX1
and
AUX2
There are two methods to connect auxiliary de-
vices to this unit.
AUX1
source:
When connecting auxiliary device using a stereo
mini plug cable
%
Insert the stereo mini plug into the
input jack on this unit.
For more details, refer to
Head unit
on page 8.
This auxiliary device is automatically set to
AUX1
.
AUX2
source:
When connecting auxiliary device using an IP-
BUS-RCA Interconnector (sold separately)
%
Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separately)
to connect this unit to auxiliary device fea-
turing RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner
’
s manual.
This auxiliary device is automatically set to
AUX2
.
#
You can only make this type of connection if
the auxiliary device has RCA outputs.
Selecting AUX as the source
%
Press SRC/OFF to select AUX as the
source.
#
If the auxiliary setting is not turned on,
AUX
cannot be selected. For more details, refer to
Switching the auxiliary setting
on page 26.
Turning the clock display
on or off
You can turn the clock display on or off.
!
Even when the sources are off, the clock
display appears on the display.
%
Press CLOCK/DISP OFF to turn the clock
display on or off.
Each press of
CLOCK
/
DISP OFF
turns the
clock display on or off.
#
The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
Switching the display
indication and button
illumination
Display indication and button illumination can
be switched on or off.
%
Press and hold CLOCK/DISP OFF.
Pressing and holding
CLOCK
/
DISP OFF
switches the display indication and button illu-
mination on or off.
#
While the display indication is turned off,
CLOCK
/
DISP OFF
button lights up.
#
Even if the display indication is turned off, op-
eration can be conducted. If operation is con-
ducted while the display indication is off, display
will light up for a few seconds and then turn off
again.
Other Functions
En
29
English
Section
05