3
Press MULTI-CONTROL to determine
the selection.
#
Even if the menu has been cancelled before
determination, operation is settled.
Switching the reception mode
If a digital broadcast reception condition gets
poor, this unit automatically switches to the
analog broadcast of the same frequency level.
If this function is set to on, the tuner switches
between digital broadcast and analog broad-
cast automatically. If this function is off, recep-
tion will be conducted within an analog
broadcast.
1
Use MULTI-CONTROL to select
BLENDING in the function menu.
2
Press MULTI-CONTROL to select your fa-
vorite setting.
ON
—
OFF
Note
If
SEEK MODE
is set to
HD
and
BLENDING
is set
to
OFF
, the tuner can not receive broadcasts. In
this case, the seek mode or reception mode is
changed automatically as follows:
!
When
SEEK MODE
is set to
HD
, if you switch
BLENDING
from
ON
to
OFF
,
SEEK MODE
is
changed to
ALL
.
!
When
BLENDING
is set to
OFF
, if you switch
SEEK MODE
from
ALL
to
HD
,
BLENDING
is
changed to
ON
.
Multi-CD Player
Basic Operations
You can use this unit to control a multi-CD
player, which is sold separately.
!
Only functions described in this manual are
supported by 50-disc multi-CD players.
%
Select a disc
Push
MULTI-CONTROL
up or down.
%
Fast forward or reverse
Push and hold
MULTI-CONTROL
left or right.
%
Select a track
Push
MULTI-CONTROL
left or right.
Notes
!
When multi-CD player completes preparatory
operations,
READY
is displayed.
!
If an error message such as
ERROR-11
is dis-
played, refer to the multi-CD player owner
’
s
manual.
!
If there are no discs in the multi-CD player ma-
gazine,
NO DISC
is displayed.
Introduction to advanced
operations
You can only use
COMP/DBE
(compression
and DBE) with a multi-CD player that supports
them.
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
3
Turn MULTI-CONTROL to select the
function.
REPEAT
(repeat play)
—
RANDOM
(random
play)
—
SCAN
(scan play)
—
PAUSE
(pause)
—
COMP/DBE
(compression and DBE)
—
ITS PLAY
(ITS play)
—
ITS MEMORY
(ITS pro-
gramming)
#
If you do not operate functions other than
ITS MEMORY
within about 30 seconds, the dis-
play automatically returns to the ordinary display.
Function and operation
REPEAT
,
RANDOM
,
SCAN
and
PAUSE
opera-
tions are basically the same as that of the
built-in CD player.
Available accessories
En
45
English
Section
06