Pioneer DEH-80PRS Series, Руководство по эксплуатации

Страница: 54 / 70

Power amp (sold separately)
Standard mode with internal amp
Important
!
Change the DSP switch to standard mode
(STD).
For more details on change settings, refer to
the operation manual or
Switching the DSP
setting mode on this page.
!
The following signals are output from the
speaker leads when this connection is in
use.
White: Front left
+
White/black: Front left
*
Gray: Front right
+
Gray/black: Front right
*
Green: Rear left
+
Green/black: Rear left
*
Violet: Rear right
+
Violet/black: Rear right
*




1
3
2
4
5 5
1 System remote control
Connect to Blue/white cable.
2 Power amp (sold separately)
3
Connect with RCA cable (sold separately)
4 To subwoofer output
5
Subwoofer
Standard mode without internal
amp
Important
!
Change the DSP switch to standard mode
(STD).
For more details on change settings, refer to
the operation manual or
Switching the DSP
setting mode on this page.
!
If using this system, we recommend that this
unit
’
s internal amp is turned off.
For details, refer to the operation manual.
!
The speaker leads are not used when this
connection is in use.












1
1
3
2
4
3
8
5 5
3
2
6
7 7
9 9
2
1
1
System remote control
Connect to Blue/white cable.
2
Power amp (sold separately)
3 Connect with RCA cable (sold separately)
4
To Rear output
5
Rear speaker
6
To Front output
7
Front speaker
8
To subwoofer output
9
Subwoofer
3-way network mode with
internal amp
Important
!
Change the DSP switch to 3-way network
mode (NW).
For more details on change settings, refer to
the operation manual or
Switching the DSP
setting mode on this page.
!
The following signals are output from the
speaker leads when this connection is in
use.
White: Middle range left
+
White/black: Middle range left
*
Gray: Middle range right
+
Gray/black: Middle range right
*
Green: High range left
+
Green/black: High range left
*
Violet: High range right
+
Violet/black: High range right
*




1
3
2
4
5 5
1
System remote control
Connect to Blue/white cable.
2 Power amp (sold separately)
3
Connect with RCA cable (sold separately)
4 To low range output
5
Low range speaker
3-way network mode without
internal amp
Important
!
Change the DSP switch to 3-way network
mode (NW).
For more details on change settings, refer to
the operation manual or
Switching the DSP
setting mode on this page.
!
If using this system, we recommend that this
unit
’
s internal amp is turned off.
For details, refer to the operation manual.
!
The speaker leads are not used when this
connection is in use.












1
1
3
2
4
3
8
5 5
3
2
6
7 7
9 9
2
1
1
System remote control
Connect to Blue/white cable.
2 Power amp (sold separately)
3
Connect with RCA cable (sold separately)
4 To high range output
5
High range speaker
6 To middle range output
7
Middle range speaker
8 To low range output
9
Low range speaker
Switching the DSP setting mode
This unit features two operation modes: the 3-
way network mode (NW) and the standard mode
(STD). You can switch between modes as de-
sired. Initially, the DSP setting is set to the
standard mode (STD).
!
After switching, reset the microprocessor.
WARNING
Do not use the unit in standard mode when a
speaker system for 3-way network mode is con-
nected to this unit. This may cause damage to
the speakers.
English
Connections
3
Section
Connections
En
01