Pioneer DEH-80PRS Series, Руководство по эксплуатации

Страница: 27 / 70

5 Turn M.C. to select cut-off frequency.
50
—
63
—
80
—
100
—
125
—
160
—
200 (Hz)
Only frequencies higher than those in the se-
lected range are output from the front speak-
ers.
6 Turn LEVER to adjust the output level
of the front speakers.
0
to
–
24 is displayed as the level is increased
or decreased.
Setting the high pass filter for rear
speakers
1 Use M.C. to select R.HPF 1.
Refer to Introduction of audio adjustments on
page 20.
2 Turn LEVER to select slope.
–
12
— –
6
—
Pass
(dB/oct.)
#
If you set the slope Pass (0 dB/oct.), the audio
signal bypasses the filter, so the filter does not
have an effect.
3 Press /DISP to display the upper tier.
4 Use M.C. to select R.HPF 2.
Refer to Introduction of audio adjustments on
page 20.
5 Turn M.C. to select cut-off frequency.
50
—
63
—
80
—
100
—
125
—
160
—
200
(Hz)
Only frequencies higher than those in the se-
lected range are output from the rear speak-
ers.
6 Turn LEVER to adjust the output level
of the rear speakers.
+6
to
–
24 is displayed as the level is increased
or decreased.
Using the auto-equalizer
The auto-equalizer is the equalizer curve cre-
ated by auto TA and EQ (refer to
Auto TA and
EQ (auto-time alignment and auto-equalizing)
on page 29).
You can turn the auto-equalizer on or off.
1 Use M.C. to select A.EQ in the audio
function menu.
Refer to Introduction of audio adjustments on
page 20.
#
If auto TA and EQ has not been carried out,
Please set Auto EQ appears. This indicates that
you cannot turn this function on.
2 Press M.C. to turn the auto-equalizer
on.
Auto EQ ON
appears in the display.
#
To turn auto-equalizer off, press M.C. again.
Recalling equalizer curves
You can adjust the equalization to match the
car
’
s interior acoustic characteristics as de-
sired.
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
Super bass Super bass
Powerful Powerful
Natural Natural
Vocal
Vocal
Flat
Flat
Custom1 Custom 1
Custom2 Custom 2
!
Custom1 and Custom2 are adjusted equal-
izer curves that you create. Adjustments
can be made with a 16-band graphic equal-
izer.
!
When
Flat
, no changes are made to the
sound. You can check the effects of the
equalizer curves by switching alternatively
between
Flat and another equalizer curve.
%
Press EQ/DISP OFF to select the equali-
zer.
Press EQ / DISP OFF repeatedly to switch be-
tween the following equalizers:
Powerful
—
Natural
—
Vocal
—
Flat
—
Custom1
—
Custom2
—
Super bass
En
27
Section
02
Operating
this
unit
Operating this unit