background image

En

2

En

The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.

The lightning flash with arrowhead symbol, 
within an equilateral triangle, is intended to 
alert the user to the presence of uninsulated 
“dangerous voltage” within the product’s 
enclosure that may be of sufficient 
magnitude to constitute a risk of electric 
shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER (OR 
BACK). NO USER-SERVICEABLE PARTS 
INSIDE. REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT

D3-4-2-1-1b_A1_En

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in 
accordance with the manufacturer’s 
instructions.
Do not install near any heat sources such as 
radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized 
or grounding-type plug. A polarized plug has two 
blades with one wider than the other. A 
grounding type plug has two blades and a third 
grounding prong. The wide blade or the third 
prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an 
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or 
pinched particularly at plugs, convenience 
receptacles, and the point where they exit from 
the apparatus.

1)    

 

 

2)    

 

3)  

 

 

 

4)  

 

 

 

5)     

 

6)  

 

 

 

7)

   
8)

    
9) 

 
 

  

10)

Only use attachments/accessories specified by 
the manufacturer.
Use only with the cart, stand, tripod, bracket, or 
table specified by the manufacturer, or sold with 
the apparatus. When a cart is used, use caution 
when moving the cart/apparatus combination to 
avoid injury from tip-over.

Unplug this apparatus during lightning storms 
or when unused for long periods of time.
Refer all servicing to qualified service personnel. 
Servicing is required when the apparatus has 
been damaged in any way, such as power-supply 
cord or plug is damaged, liquid has been spilled 
or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, 
does not operate normally, or has been dropped. 

D3-7-13-69_En

11)

12)

13)

14)

WARNING

This equipment is not waterproof. To prevent a fire or 
shock hazard, do not place any container filled with 
liquid near this equipment (such as a vase or flower 
pot) or expose it to dripping, splashing, rain or 
moisture.

D3-4-2-1-3_A1_En

WARNING

To prevent a fire hazard, do not place any naked flame 
sources (such as a lighted candle) on the equipment.

D3-4-2-1-7a_A1_En

VENTILATION CAUTION

When installing this unit, make sure to leave space 
around the unit for ventilation to improve heat radiation 
(at least 5 cm at top, 5 cm at rear, and 5 cm at each 
side).

D3-4-2-1-7d*_A1_En

CAUTION

The 

 

   

STANDBY/ON

 switch on this unit will not 

completely shut off all power from the AC outlet. 
Since the power cord serves as the main disconnect 
device for the unit, you will need to unplug it from the 
AC outlet to shut down all power. Therefore, make 
sure the unit has been installed so that the power 
cord can be easily unplugged from the AC outlet in 
case of an accident. To avoid fire hazard, the power 
cord should also be unplugged from the AC outlet 
when left unused for a long period of time (for 
example, when on vacation).

D3-4-2-2-2a*_A1_En

Operating Environment

Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH 
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in 
locations exposed to high humidity or direct sunlight (or 
strong artificial light). 

D3-4-2-1-7c*_A2_En

Содержание DDJ-SX3





















Отзывы: