14
En
r
CENSOR button
Press:
The track is played in the reverse direction while the [
CENSOR
] but-
ton is pressed, and normal playback resumes when the button is
released.
!
Even during playback in the reverse direction, normal playback
continues in the background. When the button is released, play-
back resumes from the point reached in the background.
[
SHIFT
] + press:
The track is played in the reverse direction. When the [
SHIFT
] and
[
CENSOR
] buttons are pressed again, reverse playback is canceled
and normal playback resumes.
s
PANEL SELECT button
Press:
The panel display switches in the order below each time the button
is pressed.
Panel display off
l
[
REC
] panel
l
[
FX
] panel
l
[
SP-6
] panel
l
Panel display off ...
[
SHIFT
] + press:
The panel display switches in the order below each time the button
is pressed.
Panel display off
l
[
SP-6
] panel
l
[
FX
] panel
l
[
REC
] panel
l
Panel display off ...
!
When Serato-Video is installed and enabled at the [
SETUP
]
menu, a key for switching to the [
VIDEO
] panel is displayed on
the Serato DJ software screen. To display the [
VIDEO
] panel, use
the mouse to click this key for switching to the [
VIDEO
] panel.
Mixer section
c
d
4
4
e
g
f
h
b
1 2
1 2
1 2
1 2
5
3
9
7
4
6
a
5
5
5
3
8
7
4
6
9
8
1
FX 1 assign button
Turns effect unit FX1 on and off for the respective channel.
2
FX 2 assign button
Turns effect unit FX2 on and off for the respective channel.
3
TRIM control
Adjusts the individual channel output gain.
4
EQ (HI, MID, LOW) controls
Boosts or cuts frequencies for the different channels.
5
Channel Level Indicator
Displays the sound level of the respective channels before passing
through the channel faders.
6
FILTER control
Applies the filter effect for the respective channel.
The original sound is output when the control is at the center
position.
Turn counterclockwise: Gradually decreases the low-pass filter’s
cutoff frequency.
Turn clockwise: Gradually increases the high-pass filter’s cutoff
frequency.
7
Headphones CUE/MIC TALK OVER button
Press:
The sound of channels for which the headphones [
CUE
] button is
pressed is output to the headphones.
!
When the headphones [
CUE
] button is pressed again, monitoring
is canceled.
When the [
INPUT SELECT
] switch for channel 3 or 4 is set to [
MIC1
]
or [
MIC2
], the talkover function can be turned on or off.
When the talkover function is on, the headphones [
CUE
/
MIC TALK OVER
] button flashes. When a sound of over -15 dB is
input to the microphone, the sound other than that of the micro-
phone is attenuated by approximately 20 dB.
!
The talkover function for both the microphone connected to the
[
MIC1
] terminal and the microphone connected to the [
MIC2
]
terminal can be turned on and off by pressing the headphones
[
CUE
/
MIC TALK OVER
] button for either channel 3 or channel 4.
[
SHIFT
] + press:
The track’s tempo can be set by tapping the button. (Tap function)
!
When the Tap function is used, the display of the deck section on
the computer’s screen switches to the [
Beatgrid Editer
] display.
Click [
Edit Grid
] on the computer’s screen.
8
Headphones CUE button
Press:
The sound of channels for which the headphones [
CUE
] button is
pressed is output to the headphones.
!
When the headphones [
CUE
] button is pressed again, monitoring
is canceled.
[
SHIFT
] + press:
The track’s tempo can be set by tapping the button. (Tap function)
!
When the Tap function is used, the display of the deck section on
the computer’s screen switches to the [
Beatgrid Editer
] display.
Click [
Edit Grid
] on the computer’s screen.
9
Channel fader
Move:
Adjusts the level of audio signals output in each channel.
[
SHIFT
] + move:
Use the channel fader start function.
For details on the channel fader start function, see
Using the channel
fader start function
on page 25.
a
Crossfader Assign Switch
Assigns the channel output to the crossfader.
[
A
]: Assigns to [
A
] (left) of the crossfader.
[
B
]: Assigns to [
B
] (right) of the crossfader.
[
THRU
]: Selects this when you do not want to use the crossfader.
(The signals do not pass through the crossfader.)
b
Crossfader
Outputs the sound assigned with the crossfader assign switch.
c
MASTER LEVEL control
Adjusts the master sound level output.
d
Master level indicator
Displays the master output’s audio level.
e
Booth monitor level control
Adjusts the level of audio signals output from the [
BOOTH
] terminal.
