En
9
English
Playing a track
The following describes the procedure for outputting the channel 1
sound as an example.
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc.
Position
1
TRIM
control
Turned fully counterclockwise
2
EQ
(
HI
,
MID
, and
LOW
) controls
12 o’clock position
3
FILTER
control
12 o’clock position
4
Channel fader
Minimum (lowest) position
5
MASTER LEVEL
control
Turned fully counterclockwise
6
Crossfader
Center position
2
1
3
4
6
5
2 Press the [
f
] button to play the track.
3 Turn the [TRIM] control.
Adjust the [
TRIM
] control so that the channel level indicator’s orange
indicator lights at peak level.
4 Move the channel fader to the maximum level.
5 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the audio level output from the [
MASTER OUT
] terminals to an
appropriate level.
About the controls’ setting values
The setting values of the controls, etc., below are controlled individually
for the respective decks in the Serato DJ Intro software.
!
TRIM
control
!
EQ
(
HI
,
MID
,
LOW
) controls
!
FILTER
control
!
Channel fader
!
TEMPO
slider
If the values controlled by Serato DJ Intro when the decks are switched
differ from the positions of this unit’s controls, faders, etc., the controls,
faders, etc., must be moved to the positions corresponding to the values
controlled by Serato DJ Intro before they will operate.
!
The initial settings of decks 3 and 4 of Serato DJ Intro are the center
position for the [
TRIM
] control, [
EQ
(
HI
,
MID
, and
LOW
)] controls,
and [
FILTER
] control, ±0.0% for the [
TEMPO
] slider, and the mini-
mum (lowest) position for the channel fader.
