Pioneer CNDV-40MT, Руководство по эксплуатации

Страница: 62 / 74

60
Appendix
• When driving with Guide View , Route View
or Driver’s View , upon entering an unre-
corded area the display automatically switches
to
Map View . (When the vehicle re-enters an
area stored on the disc, the display returns to
the previous map mode except for
Driver’s
View .)
Destination Search
• You cannot search a destination in an unre-
corded area using Address Search , POI
Search , or Telephone Search . (In case of the
POI search, only “City Center” search is possi-
ble.)
• If you cannot search in a currently selected
zone, the system may forcibly switch to the
zone selection screen.
• A Freeway Search covers all areas, regard-
less of the disc on which the information is
recorded.
• If a Vicinity Search is performed on the bor-
der of an unrecorded area, the system will not
necessarily select the nearest facility. (The
search will take place only within the range of
areas recorded on the disc.)
Guidance
• When your vehicle approaches an unrecorded
area, you will be notified three times: when the
distance to the unrecorded area is 12 mi (20
km), 6 mi (10 km) and 3 mi (5 km) respectively.
When your vehicle enters the unrecorded area,
a caution is given.
• In the unrecorded area, only guidance for
reaching the destination is provided. No other
guidance is given.
• If a route calculation is operated within an
unrecorded area, the route might not be set
from the streets you are currently driving. Also,
if you set the destination in an unrecorded
area of the disc, the system may not be able to
set the route up to the destination.
• If the vehicle deviates from the set route in an
unrecorded area, the Auto Reroute function
will not work.
• Even if “ Close-up of Junction ” is “ ON ”, the
display will not switch to an enlarged map of
the intersection.
• The arrow indicating the traveling direction will
not be displayed in the Audio screen.
Route Information
• If the set route goes through an unrecorded
area, no route profile for the unrecorded area
will be displayed. (If the set route traverses
both an unrecorded area and area stored on
the disc, only the route profile within the
recorded area will be displayed.)
• Route scrolling for an unrecorded area is pos-
sible only with a map scale of 0.5 mi or above.
Other Function Limitations
Overlay POI
• Overlay POI is not available in an unrecorded
area.
Avoid Area
• An area not stored on the disc cannot be set as
an Area to Avoid.
❒
A set Area to Avoid may be deleted when the
software is updated. If this happens, the sys-
tem will automatically try to recover the
deleted information, but data can be recov-
ered only for areas stored on the disc. For
items that could not be recovered, a recovery
process will begin when you set another disc.