20
Chapter 1
Basic Operation
7
Touch the street from the list.
Touching the
or
on the scroll bar scrolls you
through the list and allows you to view the
remaining items.
➲
Searching the destination by map
➞
Page 26
In the case of an item that cannot be displayed in
a single line, touching the
to the right of the
item allows you to see the whole line.
❒
If only one location is found from the list,
route calculation starts after pressing the
item.
• Touching the
specifies the selected street
and streets intersecting it, allowing you to set
an intersection as your destination. This is use-
ful when you don’t know the house number of
your destination or cannot input the house
number of the specified street.
• Touching the
displays a map of the place
you have selected. (Candidate place names
may appear in the list screen.)
8
Input the destination town or area.
If the list screen is displayed, proceed to step
9.
9
Touch the city or area where your destina-
tion is located.
Route calculation starts. When the route cal-
culation is completed, the map of your sur-
roundings appears. (The route is displayed in
green.)
❒
If the selected street is very long, and
passes through several cities or area, the
screen for entering the name of the city or
area appears.
If you did not input the house number in Step 5,
the house number input screen comes up after
the “Street” and “City” are determined. You
should now input the house number (perform
Step 5).
❒
If there is more than one place for the house
number input, or if there is no such house
number in that place, displays a list of a cer-
tain range. To start the route calculation,
touch the range within the list you wish to
specify as the destination.
❒
You can also see the destination on the
map by touching the
to the right of the
list.
➲
Searching the destination by map
➞
Page 26
❒
If you press the
NAVI (or POS)
button
during route calculation, the calculation is
canceled and the map display appears.
❒
When performing a destination search
with the route already set, select whether
to make the specified area your destina-
tion and search for a new route, or search
for a route via that area.
➲
Adding way points to the route
➞
Page 35
➲
Once searched for, a location is automati-
cally stored in the “
Destination History
”
➞
Page 38
10
Drive in accordance with the screen and
voice information.
Your Navigation System gives you the follow-
ing information with the timing adjusted to
the speed of your vehicle:
• Distance to the next turning point
• Direction of travel
• Road number of the freeway
• Way point (If this is set)
• Your destination
➲
How to view the screen
➞
Page 23
➲
Searching for another route
➞
Page 34
➲
Canceling route guidance
➞
Page 35
Scroll bar
Содержание CNDV-40MT
Страница 18: ...16 ...