Pioneer CDJ-2000nexus, Руководство по эксплуатации

Страница: 30 / 47

30
En
2 Press the [SLIP] button.
The mode switches to the slip mode.
3 During playback, press the top of the jog dial.
The scratch play mode is set.
Normal playback continues in the background even while scratching.
The [
SLIP ] button flashes in beat with the sound playing in the
background.
4 Release your hand from the top of the jog dial.
Normal playback of the sound that was playing in the background
resumes.
Slip looping
1 Press the [SLIP] button.
The mode switches to the slip mode.
2 Press the [IN/4BEAT (IN ADJUST)] button, then press
the [LOOP OUT (OUT ADJUST)] button.
Loop playback starts.
Normal playback continues in the background even during loop
playback.
The [
SLIP ] button flashes in beat with the sound playing in the
background.
! Loops of over 8 seconds cannot be set.
!
The same operation is performed when the [ IN/4BEAT ( IN ADJUST )]
button is pressed for over 1 second and a loop is set.
3 Press the [RELOOP/EXIT] button.
Looping is canceled, and normal playback of the sound that was playing
in the background resumes.
Slip beat looping
1 Press the [SLIP] button.
The mode switches to the slip mode.
2 Press and hold the selected beat on the
[NEEDLE SEARCH] pad.
The loop is set automatically and loop playback begins.
Normal playback continues in the background even during loop
playback.
The [
SLIP ] button flashes in beat with the sound playing in the
background.
!
The beat select screen is displayed when the slip mode is turned on.
! A different beat can also be selected by sliding your finger on the
[ NEEDLE SEARCH ] pad without releasing it.
3 Release your finger from the [NEEDLE SEARCH] pad.
Normal playback of the sound that was playing in the background
resumes.
4 Press the [RELOOP/EXIT] button.
The last loop that was set is played and the slip loop mode is set.
! If the slip beat loop was canceled after selecting a different beat
without lifting your finger from the [ NEEDLE SEARCH ] pad, the loop
called out with the [ RELOOP/EXIT ] button is the loop that was first
set (during playback).
Slip reverse
1 Press the [SLIP] button.
The mode switches to the slip mode.
2 During playback, move the [DIRECTION FWD REV]
lever to the REV side.
The [ REV ] indicator lights and the track is played in the reverse direction.
Normal playback continues in the background even during reverse
playback.
The [ SLIP ] button flashes in beat with the sound playing in the
background.
!
At the position 8 beats past the position at which the [ DIRECTION
FWD REV ] lever was moved to the REV side, the slip reverse mode is
automatically canceled, normal playback of the sound playing in the
background resumes and the [
REV ] indicator flashes.
!
If the [ DIRECTION FWD REV ] lever is moved to the FWD side before
8 beats have played, the slip reverse mode is canceled and normal
playback of the sound that was playing in the background resumes.
Slip hot cue
1 Press the [SLIP] button.
The mode switches to the slip mode.
2 Press and hold a [HOT CUE] (A, B, C, REC/CALL)
button.
Hot cueing begins.
Normal playback continues in the background while the [
HOT CUE ] ( A ,
B , C , REC/CALL ) button is pressed.
The [ SLIP ] button flashes in beat with the sound playing in the
background.
! At the point 4 beats after hot cueing began, the slip hot cue mode is
automatically canceled and normal playback of the sound that was
playing in the background resumes.
3 Release the [HOT CUE] (A, B, C, REC/CALL) button.
When the [ HOT CUE ] ( A , B , C , REC/CALL ) button is released before 4
beats have played since hot cueing began, normal playback of the sound
that was playing in the background resumes.
Canceling the slip mode
Press the [SLIP] button.
The slip mode is canceled.
!
The slip mode is also canceled when a track is loaded.
Playing from the point touched on
the [
NEEDLE SEARCH
] pad
Touch the [
NEEDLE SEARCH
] pad with a finger to easily play the sound
at the position at which the pad is touched. Move your finger while
touching the pad to quickly move to the desired position.
The [
NEEDLE SEARCH ] pad can only be operated in the following cases:
! In the pause mode
! While the jog dial is being pressed with the jog mode set to VINYL
In the pause mode, touch the [NEEDLE SEARCH] pad.
The currently playing position on the playing address display moves to
the point directly above the position that was touched.
!
The playing position can be moved by sliding your finger along the
pad. Note that the playing address display may not be displayed
properly if your finger is moved quickly.