2
8
BDP-LX54
1
2
3
4
A
B
C
D
E
F
1
2
3
4
Messa
g
es Relatin
g
to BD disc and DVD disc
Error Messa
g
e
Possible Error
Su
gg
ested Solution
Cannot play.
• The disc cannot be played back with this
Player.
• Check the disc, and load it correctly.
Incompatible disc.
• If you load a disc which cannot be played
with this Player (i.e. a scratched disc), or if
you load a disc upside down, this message
will appear, and the disc tray will automatically
pop out.
• Occurs if the loaded disc cannot be played
because it is a non-standard disc or
scratched, etc.
• Remove the disc.
Cannot operate.
• Occurs if an operation is incorrect.
—
This USB memory is not formatted
properly. Please format the memory in
USB memory management.
• Occurs if there is a formatting error.
• Format the USB memory again.
The Connected USB Memory cannot
be used. It should be compliant with
USB 2.0.
• Occurs if USB memory not compliant with
USB 2.0 High Speed (480Mbit/s) is used
(i.e. USB 1.0/USB 1.1).
• Connect USB 2.0 High Speed
(480Mbit/s) compliant USB memory.
• The following messages appear on the T
V
screen in case the disc you tried to playback is not appropriate or the operation
is not correct.
to FAN MOTOR
motor is abnormal, the unit return to standby mode, if the below message appear on the screen,
[2] On-screen Error Messa
g
es
To Reset this Player
• If this Player receives strong interference from a source such as excessive static electricity, strong external noise,
malfunction of power supply, or voltage caused by lightning during use or a wrong operation is sent to the Player, errors like
the Player not accepting an operation may occur. Press and hold
u
STANDBY/ON
on the Player until "RESET" appears on
the front panel display when the Player does not operate properly even after the power has been turned off. Then turn on the
power again.
• It may take several minutes until completion as the system check will be executed when the power is turned O
N
.
Please wait until the indicator lights up in this case.
• Since all settings including the language setting stored in memory are also reset when a reset has been performed, they
must be set again.
• When the problem persists even after performing a reset, unplug the AC cord and plug it in again. If this does not solve the
problem, contact the nearest service center approved by Pioneer.
The Fan On the Rear Panel May
N
ot Be Working Correctly, Check The Fan
Error Messa
g
e
FA
N
ERR
Main FL Display Unit
* The fan used in this product starts its rotation at the same time as the power is turned on and stops as the
power is turned off. It is not controlled by temperature etc.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
