Switching the digital
source setting
It is possible to connect DVD player to this
unit. Activate the digital source when using
DVD player connected to this unit.
Initially, both
Digital1
and
Digital2
are set to
off.
!
When a Pioneer DVD player is connected
to this unit with IP-BUS cable, you cannot
switch to the digital source setting.
1 Press
o
to select Digital.
Press
o
until
Digital
(e.g.,
Digital1
) ap-
pears in the display.
2 Press
r
to turn digital setting on.
#
To turn digital setting off, press
q
.
Switching the analog input
setting
It is possible to connect various equipment to
this unit
s speaker input or RCA input. Acti-
vate the analog setting when using such
equipment connected to this unit, and select
the input according to the connecting meth-
od.
1 Press
o
to select Analog.
Press
o
until
Analog
(e.g.,
Analog1
) ap-
pears in the display.
2 Press
r
to turn analog setting on.
Connection method (e.g.,
SP
) appears in the
display.
3 Press
m
or
n
to select a desired con-
nection method.
Pressing
m
or
n
will switch between
SP
and
RCA
and that status will be displayed.
#
To turn analog input setting off, press
q
.
Initial Settings
En
30
Section
08
