Adjusting the brightness
You can adjust the display brightness. Initially
this mode is set to 12.
1 Press
o
to select Brightness.
Press
o
repeatedly until
Brightness
ap-
pears in the display.
2 Press
m
or
n
to adjust the bright-
ness level.
Each press of
m
or
n
increases or de-
creases the brightness level.
0
15
is dis-
played as the level is increased or
decreased.
Correcting distorted sound
You can minimize distortion likely caused by
the equalizer curve settings.
!
Setting an equalizer level high can cause
distortion. If high sound is crippled or dis-
torted, try switching to
Low
. Normally,
leave the setting at
High
to ensure quality
sound.
1 Press
o
to select Digital ATT.
Press
o
repeatedly until
Digital ATT
ap-
pears in the display.
2 Press
m
or
n
to select Low or High.
Pressing
m
or
n
will switch between
High
(high) and
Low
(low) and that status will be
displayed.
Switching the telephone
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when a call is made or re-
ceived using a cellular telephone connected to
this unit.
1 Press
o
to select Telephone.
Press
o
repeatedly until
Telephone
appears
in the display.
2 Press
m
or
n
to switch the tele-
phone muting/attenuation.
Press
m
or
n
until the desired setting ap-
pears in the display.
!
Telephone :MUTE
Muting
!
Telephone :ATT2
Attenuation
(
Telephone :ATT2
has a stronger effect
than
Telephone :ATT1
)
!
Telephone :ATT1
Attenuation
Notes
!
The sound is turned off,
MUTE
or
ATT
is dis-
played and no audio adjustment is possible.
!
Operation returns to normal when the phone
connection is ended.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press
o
to select AUX.
Press
o
repeatedly until
AUX
appears in
the display.
2 Press
r
to turn auxiliary setting on.
AUX :ON
appears in the display.
#
To turn auxiliary setting off, press
q
.
Initial Settings
En
29
English
Section
08
