Setting remote control
code type
There are three remote control code types,
code type
A
, code type
B
and code type
H/U
.
Switch the remote code according to the com-
bined components.
!
H/U
Operating this unit with ADD-ON
mode (
M
)
!
A
Operating this unit with IP-BUS mode
(
S
) (usually use this code type)
!
B
Operating this unit with IP-BUS mode
(
S
) when combined with a multi-DVD
player
1 Set the remote control selection switch
on the left side of the remote control to
the appropriate position with a pen tip or
other pointed instrument .
!
If you select
H/U
mode, there is no need to
take the following procedure.
!
If you select
A
/
B
mode, take the following
procedure and change the code type to the
appropriate type.
2 Press 7 and 0 on the remote control si-
multaneously to change the code type.
Initially, the code type is set to
A
. Each time
you press
7
and
0
simultaneously on the re-
mote control the code type switches between
A
and
B
.
Note
When the remote control operation switch is set
to
DVD
, changing the remote control code type
enables you to operate the Pioneer DVD player
with the supplied remote control.
!
When operating a multi-DVD player only
which combined with this unit, be sure to se-
lect
A
.
Setting up the DVD player
En
57
Section
11
Setting
up
the
DVD
player