Introduction of setup
adjustments
1
1
Setup menu display
Shows the setup function names.
1 Click the joystick to display MENU.
FUNCTION
and
SETUP
appear on the display.
2 Use the joystick to select SETUP.
Move to change the menu option; click to se-
lect.
The menu option selected with the joystick is
displayed with a frame.
The function names are displayed and oper-
able ones are highlighted.
3 Use the joystick to select the desired
function.
Move to change the function; click to select.
The function selected with the joystick is dis-
played with a frame.
#
To return to the previous display, press
BACK
.
#
To return to the display of each source, press
BAND/ESC
.
Note
If you do not operate the setup function within
about 30 seconds, the display is automatically re-
turned to the source display.
Setting the video input 1
You can switch the setting according to the
connected component.
!
Select
VIDEO
to watch video of a con-
nected component as
AV-1
source.
!
Select
DVD
to watch video of a connected
Pioneer DVD head unit.
1 Use the joystick to select AV INPUT1.
2 Move the joystick left or right to select
the video input 1 setting.
Move the joystick left or right until the desired
setting appears in the display.
!
OFF
No video component is connected
!
VIDEO
External video component
!
DVD
Pioneer DVD head unit (e.g., DVH-
P5650MP)
#
Only when using this unit with IP-BUS mode
(
S
), you can select
DVD
.
Setting the video input 2
You can switch the setting according to the
connected component.
!
Select
VIDEO
to watch video of a con-
nected component as
AV-2
source.
!
Select
B. CAMERA
when a rear view cam-
era is installed on your vehicle.
1 Use the joystick to select AV INPUT2.
2 Move the joystick left or right to select
the video input 2 setting.
Move the joystick left or right until the desired
setting appears in the display.
!
OFF
No video component is connected
!
VIDEO
External video component
!
B. CAMERA
Rear view camera
Other Functions
En
60
Section
13