1 Click the joystick during display of each
source to display MENU.
MENU
appears on the display.
2 Move the joystick up or down and then
click it to display the function names you
want to operate.
#
To go to the next group of function names,
move the joystick to
NEXT
and click it.
#
To return to the previous group of function
names, move the joystick to
PREV
and click it.
3 Press BAND/ESC to return to the display
of each source.
#
You can return to the previous display by
pressing
BACK
.
Opening and closing the
LCD panel
The LCD panel will be opened or closed auto-
matically with the turning of the ignition
switch on or off. You can turn off the automatic
close/open function. (Refer to page 61.)
!
Do not close the LCD panel with hands by
force. That cause malfunction.
!
The automatic close/open function will op-
erate the display as follows.
When the ignition switch is turned OFF
while the LCD panel is opened, the LCD
panel will close after six seconds.
When the ignition switch is turned ON
again (or turned to ACC), the LCD panel
will be opened automatically.
Removing or attaching the front panel
will automatically close or open the LCD
panel. (Refer to page 22.)
!
When the ignition switch is turned OFF
after the LCD panel has been closed, turn-
ing the ignition switch ON again (or turning
it to ACC) will not open the LCD panel. In
this case, press
OPEN/CLOSE
to open the
LCD panel.
!
When closing the LCD panel, check to
make sure that it has closed completely. If
the LCD panel has stopped halfway, leaving
it like this could result in damage.
%
Press OPEN/CLOSE to open the LCD
panel.
#
To close the LCD panel, press
OPEN/CLOSE
again.
Adjusting the LCD panelangle
Important
!
If you can hear the LCD panel knocking
against your vehicle
s console or dashboard,
press
ANGLE (
)
to move the LCD panel a lit-
tle forward.
!
When adjusting the LCD panel angle, be sure
to press
ANGLE (+/
)
. Forcibly adjusting the
LCD panel by hand may damage it.
%
Press ANGLE (+/
) to adjust the LCD
panel to an easily viewable angle.
The LCD panel angle continues changing as
long as you press
ANGLE (+/
)
and hold.
#
The adjusted the LCD panel angle will be
memorized and automatically returned to the
next time the LCD panel is opened.
Turning the LCD panelhorizontal
When the LCD panel is upright and it hinders
the operation of the air conditioner, the panel
can be turned horizontal temporarily.
Basic Operations
En
19
Section
04
Basic
Operations