Pioneer AVIC-X940BT, Руководство по обслуживанию

Страница: 138 / 292

AVIC-X940BT/XNUC
138
1 2 3 4
1 2 3 4
C
D
F
A
B
E
3
4
1
2
Remove the screw and then remove
the Micro SD PCB and the Holder (1).
(Fig.5)
Release the ten latches and then remove
the Holder (2). (Fig.5)
- Removing the K eyboard PCB (Fig.5, 6)
Remove the two screws and then remove
the Holder (3). (Fig.6)
Remove the two screws and then remove
the Keyboard PCB. (Fig.6)
Fig.6
Fig.4
Fig.5
Holder (2)
Holder (3)
Micro SD PCB and Holder (1)
2
2
2
1
4
2
2
2
3
3
4
Connector
Coaxial Jumper
GGF1539
When unplugging the Coaxial Jumper, make sure to use jig GGF1539.
If the antenna cable is directly unplugged without using jig GGF1539, you might damage your fingertip or fingernail.
- -
H ow to Remove the Coa x ial J umper
- - When unplugging Coaxial Jumper, hook the point of jig GGF1539 on the lid of Coaxial Jumper
- - and vertically draw out along with the engagement axis of connector.
- -
H ow to Attach the Coa x ial J umper
- - For inserting Coaxial Jumper, adjust cord assy with the engagement axis of connector and insert it as vertically
- - as possible.
- - Do not insert the Coaxial Jumper in extreme slant, as the connector might suffer damage.
2 2 2 2
Keyboard PCB
Do not push or wimple FFC.