Pioneer AVIC-X940BT, Руководство по обслуживанию

Страница: 107 / 292

AVIC-X940BT/XNUC
107
5 6 7 8
5 6
7
8
C
D
F
A
B
E
3-2. Execute
After the necessary setting is completed, select [2. Execute] from Output Frequency Channel Extended
Test menu, then the set radio wave is emitted by depressing [MODE] key.
*The set content is able to be confirmed on the screen by depressing [HOME] key after selecting [1. Parameter Setting].
Please start the measurement.
Return to Output Frequency Channel Extended Test menu with [HOME] key.
Setting Value of Output Frequency Channel Extended Test
1. Test Scenario
0. Switch Off
1. TX Burst Mode
2. RX Burst Mode
3. RX Burst Mode with Data transparently sent to host
4. RX Burst Mode with Bit & Packet Error Measurement Mode
2. Packet Type
4. DH1
11. DH3
15. DH5
36. 2-DH1
40. 3-DH1
42. 2-DH3
43. 3-DH3
46. 2-DH5
47. 3-DH5
3. Bit Pattern
1. All 0 Pattern
2. All 1 Pattern
3. 1010 Pattern
4. PRBS-9 Sequence
9. 11110000 Pattern
10. 1100 Pattern
4. Single Frequency
2402 + (00-93) MHz Value in parenthesis is able to be set arbitrarily.
5. TX Burst Period
(002-254) Value in parenthesis is able to be set arbitrarily
6. Scrambler Mode
0. OFF
1. ON
7. Power Level
0. Power Level 0
1. Power Level 1
2. Power Level 2
3. Power Level 3
4. Power Level 4