En
g
lis
h
- 12 -
Point the remote control in the direction of the front panel to operate.
NOTE
The remote control may not function properly in direct sunlight.
Important
•
Do not store the remote control in high temperatures or direct sunlight.
•
Do not let the remote control fall onto the floor, where it may become jammed under the brake or gas
pedal.
1
Start the engine to boot up the system.
The [Select Program Language] screen appears.
NOTES
•
From the second time on, the screen shown will differ depending on the previous conditions.
•
From the second time on, enter the password for the anti-theft function if the password entry
screen appears.
2
Touch the language.
3
Touch .
The [Speaker Mode Settings] screen appears.
4
Touch the speaker modes.
[
Standard Mode
]
4-speaker system with front and rear speakers, or a 6-speaker system with front and
rear speakers and subwoofers.
[
Network Mode
]
3-way system with a high range speaker, middle range speaker and subwoofer (low
range speaker) for reproduction of high, middle and low frequencies (bands).
WARNING
Do not use the unit in Standard Mode when a speaker system for 3-way Network Mode is
connected to the unit. This may cause damage to the speakers.
5
Touch .
Initial Legal Disclaimer screen appears.
6
Touch [OK].
The top menu screen appears.
Using the remote control
Starting up the unit