After Installing this
Navigation System
1
Reconnecting the battery.
First, double-check that all connections are
correct and that this product is installed cor-
rectly. Reassemble all vehicle components
that you previously removed. Then reconnect
the negative (
–
) cable to the negative (
–
) term-
inal of the battery.
2
Start the engine.
3
Press the RESET button.
Press the
RESET
button on the display unit
using a pointed object such as the tip of a
pen.
4
Enter the following settings:
1
Install the program in the navigation sys-
tem.
2
Set the time and language.
3
Drive until the initialized sensors start oper-
ating normally.
Set the navigation system as explained in the
Operation Manual.
Note
After installing this navigation system, be sure to
check at a safe place that the vehicle is perform-
ing normally.
After Installation
En
31
English
Section
05
