English
Appendix
67
En
iPod
Message
Cause
Action
Error-02-6X/-9X/-DX
iPod failure.
Disconnect the cable from the
iPod. Once the iPod’s main menu
is displayed, reconnect the iPod
and reset it.
Error-02-67
The iPod firmware version
is old.
Update the iPod version.
Bluetooth
Message
Cause
Action
Error-10
The power failed for the
Bluetooth module of this
product.
Turn the ignition switch to OFF and
then to ON.
If the error message is still dis-
played after performing the above
action, please contact your dealer
or an authorized Pioneer Service
Station.
MirrorLink
Message
Cause
Action
The application list
could not be read out.
Failed to load the applica-
tion list.
Disconnect the cable from the
smartphone, and then connect
the smartphone again after a few
seconds.
Turn the ignition switch to OFF and
then to ON.
If the error message is still dis-
played after performing the above
action, reset the smartphone.
If the error message is still dis-
played after performing the above
action, please contact your dealer
or an authorized Pioneer Service
Station.
There is no supported
application on your
MirrorLink device.
No supported applications
can be found.
Install
MirrorLink
compliant appli-
cations to your
MirrorLink
device.
Message
Cause
Action
Communication error
occurred.
There was a communica-
tion error.
Disconnect the cable from the
smartphone, and then connect
the smartphone again after a few
seconds.
Turn the ignition switch to OFF and
then to ON.
If the error message is still dis-
played after performing the above
action, reset the smartphone.
If the error message is still dis-
played after performing the above
action, please contact your dealer
or an authorized Pioneer Service
Station.
Launching the applica-
tion failed.
Failed to launch the
application.
Try again.
Failed to display the
screen of your device
because of irregular
resolution.
The image size is too large. The size of the images transferred
from the device exceeds 800 × 480.
Handling and care of discs
Some basic precautions are necessary when
handling your discs.
■
Built-in drive and care
Use only conventional, fully circular
discs. Do not use shaped discs.
Do not use cracked, chipped, warped, or
otherwise damaged discs as they may
damage the built-in drive.
Use 12-cm discs. Do not use 8-cm discs
or an adapter for 8-cm discs.
When using discs that can be printed
on label surfaces, check the instruc-
tions and the warnings of the discs.
Depending on the discs, inserting and
ejecting may not be possible. Using
such discs may result in damage to this
equipment.
Do not touch the recorded surface of the
discs.
Store discs in their cases when not in
use.
Avoid leaving discs in excessively hot
environments including under direct
sunlight.
Do not attach labels, write on or apply
chemicals to the surface of the discs.
Do not attach commercially available
labels or other materials to the discs.
—
The discs may warp making the disc
unplayable.
—
The labels may come off during
playback and prevent ejection of the
discs, which may result in damage to
the equipment.
To clean a disc, wipe it with a soft cloth,
moving outward from the center.
Condensation may temporarily impair
the built-in drive’s performance. Leave
it to adjust to the warmer temperature
