Black plate (82,1)
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display
Equalizer curve
Powerful
Powerful
Natural
Natural
Vocal
Vocal
Flat
Flat
Custom1
Custom 1
Custom2
Custom 2
Super Bass
Super bass
!
Custom1
and
Custom2
are adjusted equal-
izer curves.
!
When
Flat
is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
Flat
and a set equalizer curve.
%
On the normal display, touch EQ to se-
lect the equalizer.
Touch
EQ
repeatedly to switch between the fol-
lowing equalizers:
Powerful
—
Natural
—
Vocal
—
Flat
—
Custom1
—
Custom2
—
Super Bass
#
If
SFC
instead of
EQ
appears on the normal
display, touch
SFC
and hold to switch to equalizer
function. About SFC, refer to
Using the sound
field control
on this page.
Using the sound field control
The SFC function creates the sensation of a
live performance.
!
One of the greatest advantages to hear
music in live is the original acoustic sound
that is echoed or reflected against the
stage surroundings. The SFC circuitry en-
ables to reproduce the live performing
sound in car environment by programming
the direct sound, early reflections, and late
reflections effects and characterizing the
sound from CD, DVD or other medium so it
becomes closer to the live acoustic sound.
1
On the normal display, touch EQ and
hold to switch to SFC function.
Touch
EQ
and hold until
Sound Field Control
appears in the display.
#
To switch to equalizer function, touch
EQ
and
hold again.
2
Touch SFC to select the desired SFC
mode.
Touch
SFC
repeatedly to switch between the
following modes:
MUSICAL
(musical)
—
DRAMA
(drama)
—
ACTION
(action)
—
JAZZ
(jazz)
—
HALL
(hall)
—
CLUB
(club)
—
OFF
(off)
Note
If the source is a 2-channel LPCM audio or a 2-
channel Dolby Digital audio and you select SFC
effects that are most applicable for 5.1-channel
audio (i.e.,
MUSICAL
,
DRAMA
or
ACTION
), we
recommend turning Dolby Pro Logic II on. On the
other hand, when selecting SFC effects that are
intended for use with 2-channel audio (i.e.,
JAZZ
,
HALL
or
CLUB
), we recommend turning Dolby
Pro Logic II off.
<CRB2163-B>82
Digital Signal Processor
En
82
Section
17
Содержание AVH-P6850DVD
Страница 119: ...Black plate 119 1 CRB2163 B 119 En 119 ...