Pioneer AVH-P6850DVD, Руководство по эксплуатации

Страница: 78 / 120

Black plate (78,1)
2 Touch any of the following touch panel
keys to select the desired mode.
!
MOVIE
–
The Movie mode suitable for
movie playback
!
MUSIC
–
The Music mode suitable for
music playback
!
MATRIX
–
The Matrix mode for when FM
radio reception is weak
!
OFF
–
Turn Dolby Pro Logic II off
!
ADJUST
–
Adjust the Music mode
#
You can operate ADJUST only when MUSIC
has been selected.
Adjusting the Music mode
You can adjust the Music mode with the fol-
lowing three controls.
!
Panorama (
PANORAMA
) extends the front
stereo image to include the surround
speakers for an exciting
“
wraparound
”
ef-
fect.
!
Dimension (
DIMENSION
) allows you to
gradually adjust the sound field either to-
wards the front or the rear.
!
Center Width Control ( CENTER WIDTH ) al-
lows center-channel sounds to be posi-
tioned between the center speaker and the
left/right speakers. It improves the left-cen-
ter-right stage presentation for both the dri-
ver and the front passenger.
1 Touch DOLBY PRO LOGIC II on the DSP
function menu.
2 Touch MUSIC and then touch ADJUST.
#
You can operate ADJUST only when MUSIC
has been selected.
3 Touch
a
or
b
to select PANORAMA (pa-
norama).
Each time you touch
a
or
b
selects the item
in the following order:
PANORAMA (panorama)
—
DIMENSION (di-
mension)
—
CENTER WIDTH (center width)
4 Touch
c
to turn the panorama control
on.
#
To turn the panorama control off, touch
d
.
5 Touch
b
to select DIMENSION and then
touch
c
or
d
to adjust front/surround
speaker balance.
Each time you touch
c
or
d
it moves the
sound towards the front or the surrounds.
+3
to
–
3
is displayed as the front/surround
speaker balance moves from front to sur-
rounds.
6 Touch
b
to select CENTER WIDTH and
then touch
c
or
d
to adjust the center
image.
Each time you touch
c
or
d
it gradually
spreads the center channel sound into the
front left and right speakers over a range
0 to
7 .
3 is the default and it
’
s recommended for
most recordings. 0 places all center sound in
the center speaker. 7 places all center sound
equally in the left/right speakers.
Setting the speaker setting
You need to make with/without (or yes/no) and
size (bass reproducing capacity) selection/ad-
justments depending on the installed speak-
ers. The size needs to be set to
LARGE
(large)
if the speaker is capable of reproducing
sounds of about 100 Hz or below. Otherwise
select
SMALL
(small).
!
When
DIGITAL DIRECT
is on, you cannot
select
SPEAKER SETTING
. First turn the
DIGITAL DIRECT
off, referring to Using the
direct control on the previous page.
!
Low frequency range is not output if the
subwoofer is set to
OFF
and the front and
rear speakers set to
SMALL
or
OFF
.
!
It is imperative that non-installed speakers
be set to
OFF
.
<CRB2163-B>78
Digital Signal Processor
En
78
Section
17