1 Touch A.MENU and INITIAL and then
touch DETACH WARNING.
2 Touch
a
to turn warning tone on.
#
To turn warning tone off, touch
b
.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Touch A.MENU and INITIAL and then
touch AUX.
2 Touch
a
to turn auxiliary setting on.
#
To turn auxiliary setting off, touch
b
.
Selecting the illumination
color
This unit is equipped with two illumination col-
ors, green and red. You can select the desired
illumination color.
1 Touch A.MENU and INITIAL and then
touch ILLUMINATION.
2 Touch
a
or
b
to select the desired illu-
mination color.
Touch
a
to select
GREEN
(green). Touch
b
to
select
RED
(red).
Setting the rear output and
subwoofer controller
This unit
s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (
FULL
) or subwoofer (
SUB. W
)
connection. If you switch the rear output set-
ting to the
SUB. W
, you can connect a rear
speaker lead directly to a subwoofer without
using an auxiliary amp.
Initially, the unit is set for rear full-range speak-
er connection (
FULL
). When rear output is
connected to full range speakers (when
FULL
is selected), you can connect the RCA sub-
woofer output to a subwoofer. In this case, you
can select whether to use the subwoofer con-
troller
s (low pass filter, phase) built-in
SUB.W
or the auxiliary
FULL
.
!
When the multi-channel processor (e.g.,
DEQ-P6600) is connected to this unit, you
cannot operate this function.
1 Touch A.MENU and INITIAL and then
touch REAR SPEAKER.
2 Touch
or
to switch the rear out-
put setting.
Touch
to select full-range speaker and
FULL
appears in the display. Touch
to select
subwoofer and
SUB. W
appears in the display.
#
When no subwoofer is connected to the rear
output, select
FULL
.
#
When a subwoofer is connected to the rear
output, set for subwoofer
SUB. W
.
#
When the rear output setting is
SUB. W
, you
cannot change the subwoofer controller.
3 Touch
or
to switch the subwoofer
output or non fading output.
Touch
to select subwoofer output and
SUB.W
appears in the display. Touch
to se-
lect non fading output and
FULL
appears in
the display.
Notes
!
Even if you change this setting, there is no
output unless you turn the nonfading output
(refer to
Using nonfading output
on page 75)
InitialSettings
En
96
Section
18