3 Touch
or
to select the segment of
the clock display you wish to set.
Each time you touch
or
it will select one
segment of the clock display:
Hour
Minute
As you select segments of the clock display
the segment selected will be highlighted.
4 Touch
or
to set the clock.
Each time you touch
it increases the se-
lected hour or minute. Each time you touch
it decreases the selected hour or minute.
Notes
!
You can match the clock to a time signal by
touching
JUST
.
If the minute is
00
29
, the minutes are
rounded down. (e.g.,
10:18
becomes
10:00
.)
If the minute is
30
59
, the minutes are
rounded up. (e.g.,
10:36
becomes
11:00
.)
!
Even when the sources are off, the clock dis-
play appears on the display.
Setting the display
appearance
Touch panel key color, background picture and
motion text can be changed.
1 Touch A.MENU and SETUP and then
touch APPEARANCE.
2 Touch
or
to select the desired
item.
Each time you touch
or
selects the item
in the following order:
TOUCH KEY COLOR
(touch panel key color)
BACKGROUND PICTURE
(background pic-
ture)
MOTION TEXT
(motion text setting)
3 Touch
or
to select the touch panel
key color.
Touch
to select the touch panel key color
blue and
BLUE
appears in the display. Touch
to select the touch panel key color silver
and
SILVER
appears in the display.
#
Changing the touch panel key color switches
the skin of the
SPEANA1
(spectrum analyzer 1)
and
LEVEL METER2
(level meter 2). (Refer to
Switching the background display
on the next
page.)
4 Touch
and then touch
or
to se-
lect the back ground picture.
Touch
to select background picture 1 and
BGP1
appears in the display. Touch
to se-
lect background picture 2 and
BGP2
appears
in the display.
5 Touch
and then touch
or
to se-
lect the motion text setting.
Touch
to select motion text off and
OFF
ap-
pears in the display. Touch
to select motion
test on and
ON
appears in the display.
#
When the vehicle
s parking brake is not de-
tected, motion text is not activated.
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owner
s man-
ual.
Other Functions
En
101
Section
19
Other
Functions