Pioneer Appli-Pro SLV C500, Руководство по эксплуатации

Страница: 8 / 24

8
Operating the C500 in GreenStar (GS) Mode
With the C500 control box in (GS) mode and also hooked into the GreenStar system, it will work as follows:
The C500 will automatically adjust the dosing rate according to the throughput signal from the GreenStar
System. It will also pause the C500 when no inoculant should be applied. Example: When you are turning
around on the headlands. Before the C500 can receive these messages you must first set up
ComPort 2 on
the GreenStar Display.
1. Setting up ComPort 2 for the GS Display Model 2630
a. Power up the GreenStar monitor
b. Go to the home screen.
c. Select the
Equipment Tab “H”
d. Press the ComPort button, located in the lower left corner.
e. Press Profile , then select New . A keyboard will appear. Create a desired name for this new
profile. (Example: Dosing 2015, Spring Crop 2015, Fall Crop 201). Enter a profile name and
press
Accept. This profile will retain the settings that you will enter in the next two steps.
f. Press ComPort . A drop down menu will contain box #1 and box #2. Select #2 . This allows
communication with ComPort 2.
g. Press Port Type . Scroll down and select Inoculants Dosing.
h. Press Accept.
i. You should now
be back to the “Equipment” Screen.
2. Turn on and priming the C500.
a. Turn on the C500
b. Once the C500 sees a throughput signal from the GreenStar System it will automatically start
the priming sequence.
3. Normal operation.
Once priming is complete one of three situations will happen
a. It will display a number . This represents that the C500 is applying inoculant. This rate is going
to be the same rate the GreenStar system is displaying.
b. It will display (0) . This represent that there is not a throughput signal at that time. Example.
There is no crop being harvested but the main clutch is on.
c. It will display (STOP) . This represents one of two conditions.
1. The main clutch is off and no signal is being received from the GreenStar System
2. The cable between the C500 and GreenStar System is disconnected or a wire is broken or
severed.