Pioneer 1200, Руководство по техническому обслуживанию

Страница: 244 / 300

MC012C-AS00 UNITIZED TRANSAXLE WITH DIFFERENTIAL LOCK General Information
Page 16-2 2003 Pioneer 1200/1200SE Gasoline Vehicle Maintenance and Service Manual
16
Shifter Lever
A shifter lever, connected to a shifter arm, is used to change the gears to one of three shift positions: FOR-
WARD (F), NEUTRAL (N), or REVERSE (R)
(Figure 16-2, Page 16-2). Bring the vehicle to a complete stop
before changing FORWARD or REVERSE direction.
LUBRICATION
There are two oil port plugs located on the right (driven clutch) side of the unitized transaxle (Figure 16-3,
Page 16-2) . When the vehicle is on a level surface, use the upper level plug as a lubricant level indicator.
Lubricant level should be even with the bottom of the hole. The lower plug is used for draining. When draining
lubricant, both plugs should be removed to allow the lubricant to drain faster. Be sure the drain plug and gas-
ket are cleaned and installed before filling the transaxle with new lubricant. Use a funnel when filling the tran-
saxle through the lubricant fill hole. Fill with 29 oz. (.85 liters) 80-90 WT. API class GL-3 or 80-90 WT. AGMA
class 5 EP gear lubricant Tighten the plug to 20 ft-lb (27.1 N·m).
Differential Lock Lever
The differential lock lever is located between the driver and passenger seats (Figure 16-4, Page 16-2) .
Figure 16-2 Shifter Positions Figure 16-3 Lubricant Level
Figure 16-4 Differential Lock Lever
F N R
SHIFTER
LEVER
SHIFTER
ARM
TOP VIEW
DRAIN
PLUG
C l u b C a r
Lubricant
should be level
with bottom of
level indicator hole.
CCI 1
020
46601
REDUCED STEERING
CONTR
OL MA
Y CA
USE
SERIOUS INJUR
Y OR DEA
TH
Disenga
ge diff
erential loc
k on
paved surfaces.
WA
RNIN
G