PIONEER DJ DDJ-1000STR, Руководство по эксплуатации

Страница: 63 / 132

Advanced use
63
En
Using Cue Loop
1 Press the [HOT CUE] mode button while holding the [SHIFT]
button.
The unit enters Cue Loop mode.
2 Press a Performance Pad during playback.
The Loop In point is set on the Hot Cue slot and loop playback starts.
• The loop length depends on the beat number setting of Auto Loop.
The Loop In point is assigned to Performance Pads as follows.
The length of the loop at this time is the number of beats set for auto looping.
The Loop In points are assigned to the pads as shown below.
• With the Cue Loop function, the Hot Cue point is used as the Loop In point.
If you press a Performance Pad at which a Hot Cue point is already set, a
loop starts from that Hot Cue point.

Cutting the loop
Press the [PARAMETER

] button during loop playback.
Each time you press the button, the loop cuts in half.
• Press the [LOOP IN] button while holding the [SHIFT] button to
obtain the same effect.

Extending the loop
Press the [PARAMETER

] button during loop playback.
Each time you press the button, the loop doubles in length.
• Press the [LOOP OUT] button while holding the [SHIFT] button to
obtain the same effect.
Loop 1 Loop 2 Loop 3 Loop 4
Loop 5 Loop 6 Loop 7 Loop 8