Step by Step
15
Recording
Before you start recording, make sure that both the video source and the USB
device are properly connected and that you have set the recording quality you
want.
Depending on how long you press the
REC
button, the recording can be started
in one of two different modes.
Normal Recording Mode
When you press the
REC
button for less than two seconds, normal recording
mode is started.
Note that recording can begin only if:
The connected USB device has been detected by Pinnacle Video Transfer; in
other words, the LED at the USB port must be constantly lit blue.
A valid video signal is detected; in other words, the LED at the video input
must be constantly lit blue.
The memory on the connected USB device is not full.
The USB device does not contain a recorded file with the same name.
Recording is automatically suspended, if:
The video signal is interrupted for more than 10 seconds.
The memory of the connected USB device is full.
