Pinnacle Video Transfer
14
Meaning of the LED Displays
The following information is indicated by the LEDs at the video and audio
inputs and at the USB port on Pinnacle Video Transfer:
LED off
The corresponding input is not selected, no device is connected or a connected
device has not been detected.
LED constantly lit blue
The corresponding input is selected and the video/audio signal has been
detected.
The connected USB device has been detected. You can disconnect the device
from Pinnacle Video Transfer at any time.
LED constantly lit red
A recording is in progress or the device is being accessed.
Please do not disconnect the corresponding inputs and USB devices from
Pinnacle Video Transfer.
LED running light
A device or signal recognition process is running. Please do not disconnect the
affected inputs and USB devices from the Pinnacle Video Transfer device.
LED blinking red
The start of the recording was not successful or the recording was canceled due
to an error, for example:
The video signal was interrupted for more than 10 seconds during recording.
When the recording was started, there was no USB device connected.
When the recording was started, there was no USB device detected.
The USB device was disconnected from Pinnacle Video Transfer during
recording.
The USB storage device memory is full.
File numbering has already reached maximum or the USB device already
contains a file with the same name.
