19
1 ≤ (xL+xH×256) ≤ 1023
1 ≤ (yL+yH×256) ≤ 288
0 ≤ d ≤ 255
k = (xL+xH×256) × (yL+yH×256) ×8
The maximum capacity that downloads to NV is 8096 bytes.
Descriptions:
Defines the specified flash bit image.
n specifies the number of NV bit images to define.
xL and xH specify the horizontal direction for one NV bit image (xL + xH x 256) x 8 dots.
yL and yH specify the vertical direction for one NV bit image (yL + yH x 256) x 8 dots.
Notes:
●
There is the potential of damaging the non-volatile memory by overusing the command, so only use this
command once a day to write to the non-volatile memory.
●
This command erases all previously defined NV bit images. The printer cannot redefine only one of several
data definitions that had been defined before. Therefore, all data must be resent.
●
The printer may enter a BUSY state while writing data to the non-volatile memory when using this command.
While the printer is BUSY, the printer will stop receptions so data will not be received from the host
(including real-time commands).
●
NV bit image is a bit image defined by this command in non-volatile memory and is printed by the FS p
(Print NV bit image) command.
●
This command is effective only when processed at the top of the line when standard mode is being used.
●
This command is effective when 7 bytes of FS to yH of the command are processed normally.
●
When the amount of data exceeds the capacity left in the range defined by xL, xH, yL, yH, the printer only
processes the data in the defined range.
●
This command is invalid when processing an argument that is out of the defined range with the initial NV bit
image data.
●
The printer terminates processing of this command and starts writing data to the non-volatile memory if an
argument out of the defined range is processed on the second and subsequent NV bit image data. This
invalidates the NV bit image being defined (making it undefined), but the NV bit images prior to that are
valid.
●
d specifies defined data. Bits that correspond to the dots to print are 1, and the bits that correspond to the dots
that are not printed are 0.
●
An n number of NV bit images are defined in ascending order from 01H. Therefore, The first data of
[xLxHyLyHd1.dk] is an NV bit image of the number 01H. The final data of [xLxHyLyHd1.dk] is the NV bit
image of the number n. This matches with the NV bit image number that is specified for NV bit image
printing (by FS p).
●
One NV bit image definition data is configured by [xL xH yL yH d1.dk]. Therefore, if defining only one NV
bit image data, n = 1. The data of [xL xH yL yH d1.dk] is processed only once. This uses ([data: (xL + xH x
256) x (yL + yH x 256) x 8] + [Data: 4]) of non-volatile memory.
●
The printer is in a BUSY state just prior to writing to the non-volatile memory.
●
The sending of ASB status and detection of status are not possible while processing this command even when
the ASB function is specified.
●
When processing this command while defining a macro, the macro definition is terminated and the command
commences with processing.
●
NV bit images that have been defined are not initialized by the ESC @ (Initialize printer), a reset or by
turning off the printer’s power.
●
This command only defines the NV bit image, but it does not print it. To print an NV bit image, use FS p
Содержание PP7MX
Страница 1: ...PP7MX PRINTER COMMAND MANUAL Pinnacle Technology Corp...
Страница 2: ...CONTENTS 1 COMMANDS 1 2 COMMAND SAMPLE hex command 30...
Страница 31: ...29 Print Sample Width size 3 Width size 4 Width size 5...
Страница 33: ......
